Technical register for agricultural, construction and commercial machinery · sourced data

BETANET Boat S

Built: 2023–2026 · Series: Other models

More machines from model year 2023

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

BETANET builds the Boat S. According to the available register data, the recorded vehicles date from 2023 to 2026. Dimensions: 4,435 mm long and 1,563 mm wide. Its kerb weight comes to 111 kg. Fully loaded, it may not exceed 590 kg. According to the Finnish vehicle register, 141 examples of this model are on record. The EU type-approval number for this model is e29*2007/46*0011*12.

Betanet – other models: the collective page of types outside the named ranges up to 750 kg, from Cargo S to XL, the boat trailers Marlin, Salmon and Shark and the Jettitraileri, unladen weights from 111 to 290 kg

This page gathers the Betanet trailers the register could not assign to a named range. Alongside the size-named types Micro, Small, Medium, Large and the Cargo range from S to XL, the range includes, with Marlin, Salmon and Shark and Boat S, a group of recognisable boat trailers, and with the Jettitraileri – Finnish for jet-ski trailer – a dedicated personal-watercraft version; the codes BE, BS, CP and BN with an appended number and the suffix Eco or L/R mark further build sizes.

Read on 3 more paragraphs

The register lists here 23 versions with unladen weights from 111 to 290 kg, gross weights from 550 to 825 kg, lengths from 3,180 to 5,109 mm and widths from 1,562 to 1,906 mm.

With gross weights up to around 800 kg and a long, narrow build, the range clearly targets the boating and watersports market, where light, unbraked to lightly braked trailers are sought for kayaks, motorboats and jet skis.

When buying used, these light watersports trailers call above all for checking corrosion on frame and axle from frequent contact with salt or fresh water, the condition of the plastic rollers and skids of the hull support, the function of the winch and cable, and bearing play in the wheel hubs; on the Cargo versions, also the weatherproofing and lashing points of the load area.

Sources: Kennwerte der Modelle Betanet (weitere Modelle)

Technical data

Dimensions and weights

Length4,435 mmcorrect
Width1,563 mmcorrect
Unladen weight111 kgcorrect
Gross vehicle weight590 kgcorrect

Frequently asked questions

How much does the BETANET Boat S weigh?

The unladen weight is 111 kg.

What is the gross vehicle weight of the BETANET Boat S?

590 kg.

What are the dimensions of the BETANET Boat S?

4,435 mm × 1,563 mm.

When was the BETANET Boat S built?

Production years: 2023–2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare