Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsAllis Chalmers › D 270

Allis Chalmers D 270

Built: 1957 · Series: Other models

More machines from model year 1957

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

D 270 comes from the manufacturer Allis Chalmers. According to the available register data, the vehicle dates from 1957. The tractor is 3,040 mm long and 2,120 mm wide. Its kerb weight comes to 1,150 kg. The engine delivers 20.1 kW, has 4 cylinders, with a displacement of 2,100 cm³. The Finnish vehicle register lists one example of this model. The gearbox has 4 gears.

Technical data

Engine

Power20.1 kWcorrect
Rated speed1,650 rpmcorrect
Cylinders4correct
Displacement2,100 cm³correct

Dimensions and weights

Length3,040 mmcorrect
Width2,120 mmcorrect
Height1,980 mmcorrect
Wheelbase1,895 mmcorrect
Unladen weight1,150 kgcorrect

Drivetrain and chassis

Gearbox4 V/1 Rcorrect
Gears4correct
Forward gears4correct
Reverse gears1correct
Top speed20 km/hcorrect

Working data

Fuel tank capacity45.5 lcorrect

Where this model stands

Power-to-weight ratio: 17.5 kW/t (20 kW / 1.1 t)

Power class: Compact (< 40 hp)

Stronger than 15% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Allis Chalmers D 270 have?

The Allis Chalmers D 270 delivers 20.1 kW.

How much does the Allis Chalmers D 270 weigh?

The unladen weight is 1,150 kg.

What engine does the Allis Chalmers D 270 have?

4 cylinders, 2,100 cm³ displacement.

How fast does the Allis Chalmers D 270 go?

Top speed is 20 km/h.

What are the dimensions of the Allis Chalmers D 270?

3,040 mm × 2,120 mm × 1,980 mm.

When was the Allis Chalmers D 270 built?

Production years: 1957.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare