Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersWEST MERSEA › PB 250

WEST MERSEA PB 250

Built: 1996 · Series: Other models

More machines from model year 1996

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

PB 250 comes from the manufacturer WEST MERSEA. According to the available register data, the vehicle dates from 1996. The trailer is 2,230 mm wide. Its kerb weight comes to 140 kg. Fully loaded, it may not exceed 2,500 kg. The wheelbase measures 800 mm. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

West Mersea – other models: the collective register page for boat trailers outside the named ranges, for sailing classes Dragon, Etchells and Mumm 30, 140 to 870 kg kerb weight

This page brings together West Mersea trailers that the register could not assign to a named range. The brand name refers to the English coastal town of West Mersea in Essex, known for its sailing club. The model names state the boat class directly: Dragon Road Trailer, Etchells Road Trailer and Mumm 30 Road Trailer are road trailers for the international one-design classes of the same name, while Swallow names a further boat class.

Read on 3 more paragraphs

The register lists 13 versions here with kerb weights from 140 to 870 kg and gross vehicle weights from 1,500 to 3,000 kg. Widths range from 2,050 to 2,350 mm, matched to the hull widths of the respective boat classes.

Road trailers for racing yachts such as Dragon, Etchells or Mumm 30 are matched to the exact hull profile of the class, since these boats are built to strict one-design rules and must be transported without damage to keel or hull. The market for such class-specific boat trailers is small and closely tied to the relevant sailing associations.

When buying used, check the rollers and support pads for keel and hull, the condition of the winch and cable, how freely the axles turn after saltwater exposure, and corrosion on the chassis and fittings. Also check the lighting, the condition of tyres and bearings, and the fit of the keel rollers and supports to the specific boat profile.

Sources: Kennwerte der Modelle West Mersea (weitere Modelle)

Technical data

Dimensions and weights

Width2,230 mmcorrect
Wheelbase800 mmcorrect
Unladen weight140 kgcorrect
Gross vehicle weight2,500 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the WEST MERSEA PB 250 weigh?

The unladen weight is 140 kg.

What is the gross vehicle weight of the WEST MERSEA PB 250?

2,500 kg.

Up to what speed is the WEST MERSEA PB 250 approved?

Approved up to 100 km/h.

When was the WEST MERSEA PB 250 built?

Production years: 1996.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare