Trebbiner HP25.50-18
Built: 1992 · Series: Other models
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Trebbiner – trailers from Trebbin in Brandenburg outside the named ranges: unladen weights from 280 to 2,440 kg, gross weights from 1,000 to 3,500 kg, widths up to 2,550 mm
Trebbiner denotes vehicle building from Trebbin in Brandenburg; this page gathers the trailers the register could not assign to a named range. Model designations such as CT 13.15, HP25.50-18 or KH30.50-18ST combine a range abbreviation with multi-digit numeric codes.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 280 to 2,440 kg, gross weights from 1,000 to 3,500 kg and a length of 3,870 mm at widths from 1,650 to 2,550 mm.
With gross weights of up to 3.5 tonnes, these trailers sit entirely within the car-trailer class, from a light single-axle unit to a tandem-axle version for heavier loads; the nine versions show the spread of a regional trailer builder's range between a small trailer and a larger tandem model. The combined range-and-number codes make it easier to locate individual versions in the register, even where they lack a separate model name.
On a used trailer of this class, the frame and axles for rust and welded joints, the braking system, the coupling and drawbar eye or overrun device, the condition of the sides or tarpaulin, and the tyres and lighting count; on the smaller, unbraked versions it is also worth checking the jockey wheel and coupling head. When checking the papers, it is also worth comparing axle load, trailer class and registration date with the vehicle's actual condition, especially on older or heavily used examples.
Technical data
Dimensions and weights
| Width | 1,960 mmcorrect |
|---|---|
| Wheelbase | 700 mmcorrect |
| Unladen weight | 750 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Trebbiner HP25.50-18 weigh?
The unladen weight is 750 kg.
What is the gross vehicle weight of the Trebbiner HP25.50-18?
2,000 kg.
Up to what speed is the Trebbiner HP25.50-18 approved?
Approved up to 100 km/h.
When was the Trebbiner HP25.50-18 built?
Production years: 1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.