Sprint Muenchen S1800A
Built: 1985 · Series: Other models
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sprint München – other models: boat trailers from the 1300E to the 3500A, type figure matching gross weight in kilograms, unladen weights 310 to 660 kg, gross weights up to 3,500 kg
Sprint-Anhängerbau was a boat-trailer manufacturer based in Munich; the competitor Harbeck of Waging am See took the company over in 1988, and the brand has not operated independently since. This page gathers the Sprint München trailers the register could not assign to a range of its own – from simple boat trailers to the Sealine type for larger boats. The type designations clearly track the permissible gross weight in kilograms: the 1300E sits at the lower end of the gross weight span, the 2000A in the middle, the 3500A at the top at 3,500 kg; the letter suffixes A, ST, TA and ALU mark different equipment variants, among them the M 2000 TA, S1800A and S2000 ALU as aluminium versions.
Read on 3 more paragraphs
The register lists here 18 versions with unladen weights from 310 to 660 kg, permissible gross weights from 1,300 to 3,500 kg, lengths from 6,100 to 8,420 mm and widths from 1,920 to 2,400 mm.
Trailers of this size are typical boat trailers for leisure and sports boats, as used on lakes and coastal waters in southern Germany. They compete with the trailer ranges of larger manufacturers but stand out with keel-roller and support systems tailored to boats, plus lightweight aluminium versions.
When buying used, what matters most on boat trailers is the condition of the axles and wheel bearings, which can corrode from submersion during launching, as well as the condition and function of the support and keel rollers, the overrun brake on the heavier types, and the lighting system including the plug connector. The frame's galvanising and welds should be checked for rust scars, and the tyres for flat spots after long periods of standing.
Sources: Kennwerte der Modelle Sprint München (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,120 mmcorrect |
|---|---|
| Wheelbase | 4,520 mmcorrect |
| Unladen weight | 310 kgcorrect |
| Gross vehicle weight | 1,800 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Sprint Muenchen S1800A weigh?
The unladen weight is 310 kg.
What is the gross vehicle weight of the Sprint Muenchen S1800A?
1,800 kg.
Up to what speed is the Sprint Muenchen S1800A approved?
Approved up to 100 km/h.
When was the Sprint Muenchen S1800A built?
Production years: 1985.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.