Schwarzmuller Z2
Built: 2024 · Series: Other models
Technical data
Dimensions and weights
| Length | 8,410 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 4,380 mmcorrect |
| Unladen weight | 5,310 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Schwarzmuller Z2 weigh?
The unladen weight is 5,310 kg.
What is the gross vehicle weight of the Schwarzmuller Z2?
20,000 kg.
Up to what speed is the Schwarzmuller Z2 approved?
Approved up to 100 km/h.
What are the dimensions of the Schwarzmuller Z2?
8,410 mm × 2,480 mm.
When was the Schwarzmuller Z2 built?
Production years: 2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
9-20
F-SERIE
G- SERIE
G-SERIE
HANDELSBEZ 40/100
HKS 2/E
HKS 2/E-S2
J-SERIE
K-SERIE
N-SERIE
N/A
ONBEKEND
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.