ROTAIR MDVS 120 P7
Built: 2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rotair – other models: the collective page of compressor trailers outside the named ranges, MDVN 45 AP to MDVS 120 P7, 850 to 2,160 kg unladen weight, up to 2,500 kg gross weight
This page gathers the Rotair trailers the register could not assign to a named range. The maker from Boves near Cuneo in Piedmont builds towable construction compressors mounted on single- and multi-axle trailers; the type codes MDVN, MDVS and MWVN each precede a number distinguishing the individual size within the range. The many spellings of similar types, such as MDVN 52 AK and MDVN52AK, show a programme that grew over the years with inconsistent recording of the same ranges.
Read on 3 more paragraphs
The register lists here 30 versions with unladen weights from 850 to 2,160 kg, gross weights from 900 to 2,500 kg, lengths from 3,970 to 4,010 mm and widths from 1,340 to 1,980 mm.
Compressor trailers of this class are towed on building sites, in road and pipeline construction and by hire firms behind cars, pick-ups or light trucks, supplying the compressed air for breakers, sandblasting gear or pneumatic tools. With gross weights of up to 2.5 tonnes, they stay within vehicle class O2 and so can be used in site traffic without an articulated tractor unit.
On a used compressor trailer, the operating hours and service history of the compressor, the condition of the diesel engine and radiator, the tightness of hoses and fittings, the condition of chassis, axles and brakes, and corrosion on the cladding all count; spare parts for the compressor run through Rotair and the construction-equipment trade.
Technical data
Dimensions and weights
| Width | 1,980 mmcorrect |
|---|---|
| Unladen weight | 2,050 kgcorrect |
| Gross vehicle weight | 2,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the ROTAIR MDVS 120 P7 weigh?
The unladen weight is 2,050 kg.
What is the gross vehicle weight of the ROTAIR MDVS 120 P7?
2,500 kg.
Up to what speed is the ROTAIR MDVS 120 P7 approved?
Approved up to 100 km/h.
When was the ROTAIR MDVS 120 P7 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MD VN 51AP-G
MDVN 45 AP
MDVN 45AP
MDVN 46 K
MDVN 51 AP
MDVN 52 AK
MDVN 52 APG
MDVN 52 MP
MDVN 52AK
MDVN 52AP
MDVN 53 ECO V
MDVN 53 K
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.