Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersOrbons › GO1.6.

Orbons GO1.6.

Built: 1984 · Series: Trailers up to 3.5 t (Class O2)

More machines from model year 1984

The photo shows the G.O.B. 2 from the same series. Source: https://www.landwirt.com/kleinanzeigen/detail/pongratz-29561

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

GO1.6. from Orbons falls into the category Trailers up to 3.5 t (Class O2). According to the available register data, the vehicle dates from 1984. The trailer is 1,770 mm wide. Its kerb weight comes to 470 kg. The permitted gross weight is 1,600 kg. The wheelbase measures 700 mm. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

Orbons Anhänger bis 3,5 t (Class O2) – Dutch trailer builder with the G range, 250 kg to 3.5 t kerb weight, 1.0 to 2.55 m width

Class O2 covers trailers from 0.75 to 3.5 t gross vehicle weight. Orbons is a Dutch builder of such trailers with a range whose type codes mostly begin with "G" (such as G02, G05, G.O.2 or GO4); the following digits and letters presumably denote payload or axle configuration, though no reliable system can be derived from the register, particularly as spellings with and without dots occur in parallel.

Read on 3 more paragraphs

The register lists 86 versions with kerb weights from 250 to 3,500 kg, gross vehicle weights from 850 to 3,500 kg and widths from 1,000 to 2,550 mm; length figures are recorded for only very few models and are not given here.

With a span from small single-axle trailers to tandem-axle units at the upper end of class O2, Orbons serves the core segment of private and commercial light transport – from garden and building-material trailers to horse and equipment trailers.

Used, what counts is the condition of the drawbar and overrun brake, rust on the frame and side boards, axle bearing and tyre condition, the lighting system, and, on enclosed bodies, the sealing of roof and doors; parts supply runs mainly through the Dutch and German trailer specialist trade.

Sources: Kennwerte der Modelle Orbons Anhänger bis 3,5 t (Klasse O2)

Technical data

Dimensions and weights

Width1,770 mmcorrect
Wheelbase700 mmcorrect
Unladen weight470 kgcorrect
Gross vehicle weight1,600 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Orbons GO1.6. weigh?

The unladen weight is 470 kg.

What is the gross vehicle weight of the Orbons GO1.6.?

1,600 kg.

Up to what speed is the Orbons GO1.6. approved?

Approved up to 100 km/h.

When was the Orbons GO1.6. built?

Production years: 1984.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare