Moslein -
Built: 2021 · Series: Other models
Technical data
Dimensions and weights
| Length | 8,250 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,500 mmcorrect |
| Unladen weight | 3,100 kgcorrect |
| Gross vehicle weight | 10,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Moslein - weigh?
The unladen weight is 3,100 kg.
What is the gross vehicle weight of the Moslein -?
10,500 kg.
Up to what speed is the Moslein - approved?
Approved up to 100 km/h.
What are the dimensions of the Moslein -?
8,250 mm × 2,550 mm.
When was the Moslein - built?
Production years: 2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DTD18
MOESLEIN
MTH 2
M�SLEIN
ST3
T03 SCHWEBHEIM
TA4 SCHEBHEIM
TA4 SCHWEBHEIM
THT 11
TTA 21 T
TTA 21 T SCHWEBHEIM
TTA T
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.