Mercedes Benz/partner SPRINTER
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz Sprinter from 2020: a gross weight of 5,500 kg and a payload of 2,760 kg, more than half the gross weight available as cargo.
This Sprinter from 2020, with a gross weight of 5,500 kg, belongs to the heavier versions of the series that already exceed the 3.5-tonne limit for a category B licence. Six wheels with twin tyres on the rear axle carry the higher payload of this version.
Read on 3 more paragraphs
A four-cylinder engine with a displacement of 2,143 cm³ drives a vehicle with an unladen weight of 2,740 kg and a gross weight of 5,500 kg, giving a payload of 2,760 kg. The vehicle therefore carries more than half of its gross weight as cargo, at a length of 7,200 mm and a width of 2,100 mm.
A payload share of more than 50 percent of the gross weight is a favourable figure for a van of this size and points to a comparatively light body without heavy additional equipment. Such vehicles are used in parcel and general cargo transport, where every extra kilogram of payload translates directly into more goods carried.
When buying such a commercially used Sprinter, checking the suspension and brakes for wear from regular full-load operation matters, as does the tightness of the doors and the load-bed floor. The twin rear tyres should be checked for equal pressure and tread depth on both wheels on each side. The condition of the wheel bearings on the rear axle is also worth checking, since uneven wear under twin tyres is easy to overlook during a quick inspection.
Sources: SpecCodex-Register: Kennwerte des Modells Mercedes-Benz Sprinter, Mercedes-Benz (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,143 cm³correct |
Dimensions and weights
| Length | 7,200 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 2,740 kgcorrect |
| Gross vehicle weight | 5,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Mercedes Benz/partner SPRINTER weigh?
The unladen weight is 2,740 kg.
What is the gross vehicle weight of the Mercedes Benz/partner SPRINTER?
5,500 kg.
What engine does the Mercedes Benz/partner SPRINTER have?
4 cylinders, 2,143 cm³ displacement.
How fast does the Mercedes Benz/partner SPRINTER go?
Top speed is 90 km/h.
What are the dimensions of the Mercedes Benz/partner SPRINTER?
7,200 mm × 2,100 mm.
When was the Mercedes Benz/partner SPRINTER built?
Production years: 2020.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.