Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mercedes Benz › ML › ML 270CDI

Mercedes Benz ML 270CDI

Built: 2001-2005 · Series: ML

More machines from model year 2001

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the ML 270CDI, Mercedes Benz offers a model from the ML series. Production: 2001-2005. The engine delivers 120 kW, has 5 cylinders, with a displacement of 2,685 cm³. The vehicle is 4,830 mm long and 1,840 mm wide. The unladen weight is 2,130 kg. The wheelbase measures 2,820 mm. The gross vehicle weight is 2,870 kg. The vehicle runs on 4 wheels. The ML series covers 53 models. Rated output within it ranges from 120 to 225 kW; the ML 270CDI sits at the bottom of that range with 120 kW. Its immediate neighbours are the ML 280 above it with 140 kW. Unladen weight within it ranges from 2,130 to 2,440 kg; here the ML 270CDI sits at the bottom of that range with 2,130 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz ML – collective page of the M-Class in commercial N1 registration: W163 to W166, CDI diesels and 4MATIC four-wheel drive, 120 to 225 kW from four- to eight-cylinders

This page gathers the Mercedes-Benz M-Class (ML) in the version registered as a commercial vehicle – in the Netherlands as an N1-class van. The M-Class began in 1997 at the newly built Tuscaloosa plant in Alabama, Mercedes-Benz's first plant in the United States; the W163 generation ran until 2005, the W164 from 2005 to 2011, and the W166 from 2011. The first two digits of the type designation roughly give the engine capacity in litres times ten – the ML 270 with a five-cylinder, the ML 320 and 350 with a six-cylinder, the ML 500 with an eight-cylinder – CDI denotes common-rail diesel injection, 4MATIC permanent four-wheel drive, and AMG the higher-output 55 and 63 models.

Read on 3 more paragraphs

The register lists here 53 versions with outputs from 120 to 225 kW, displacements from 2,143 to 6,209 cm³ from four- to eight-cylinders, unladen weights from 2,050 to 2,444 kg against gross weights of 2,800 to 3,050 kg; lengths are recorded for a handful of entries at 4,587 to 5,020 mm, and width runs throughout from 1,820 to 2,120 mm.

The commercial N1 registration of the SUV was common above all in the Netherlands, where it offered tax advantages over private car registration; technically the M-Class remained the road-oriented SUV from Tuscaloosa with which Mercedes-Benz competed against the BMW X5 and Range Rover.

On used examples, all generations call for checking the air suspension (Airmatic) and timing chain, the CDI engines their injectors and turbine housing, 4MATIC versions the transfer case and propshaft, and rust at the rear wheel arches; parts run through the regular Mercedes-Benz network.

Sources: SpecCodex register, model data: Mercedes Benz ML, Mercedes-Benz (manufacturer)

Technical data

Engine

Power120 kWcorrect
Cylinders5correct
Displacement2,685 cm³correct

Dimensions and weights

Length4,830 mmcorrect
Width1,840 mmcorrect
Wheelbase2,820 mmcorrect
Unladen weight2,130 kgcorrect
Gross vehicle weight2,870 kgcorrect

Drivetrain and chassis

Wheels4correct

Where this model stands

Power-to-weight ratio: 56.3 kW/t (120 kW / 2.1 t)

Stronger than 81% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz ML 270CDI have?

The Mercedes Benz ML 270CDI delivers 120 kW.

How much does the Mercedes Benz ML 270CDI weigh?

The unladen weight is 2,130 kg.

What is the gross vehicle weight of the Mercedes Benz ML 270CDI?

2,870 kg.

What engine does the Mercedes Benz ML 270CDI have?

5 cylinders, 2,685 cm³ displacement.

What are the dimensions of the Mercedes Benz ML 270CDI?

4,830 mm × 1,840 mm.

When was the Mercedes Benz ML 270CDI built?

Production years: 2001-2005.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare