Mercedes Benz LPS 1418/30
Built: 1966 · Series: LPS
More machines from model year 1966
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz LPS: cab-over trucks and semi-tractors from the transition era, from the light LPS 608 to the 21-tonne LPS 2024 tractor, four- to eight-cylinder diesels up to 12.8 litres
In the LPS designation, L stands for Lastwagen (truck) and P for the cab-over layout (Pullman) that Mercedes-Benz introduced from the 1960s alongside the older short-bonnet trucks, while S marks semi-tractor versions within the series. The type numbers follow the logic common to Mercedes trucks of the period, in which the digits express weight class and engine power, from the light distribution truck LPS 608, through the LPS 813 and LPS 1319, to the heavy semi-tractor LPS 2024/6X2.
Read on 3 more paragraphs
The register lists here 7 versions with four- to eight-cylinder diesel engines of 4,000 to 12,760 cc, kerb weights from 2,552 to 7,658 kg, gross vehicle weights from 3,500 to 21,000 kg, lengths from 4,880 to 5,900 mm and widths from 2,160 to 2,520 mm.
The series therefore spanned a wide field: light vehicles for urban distribution work at the lower end and heavy semi-tractors for long-haul work at the upper end; it stood at the transition between the classic short-bonnet form and the later cab-over NG and SK generations of Mercedes-Benz. Compared with the older short-bonnet trucks, the cab-over layout allowed a shorter overall length for the same load area, an advantage especially in urban distribution work.
When buying used, check the frame and cab mounting for rust, the condition of the cab-tilt mechanism, clutch and gearbox wear on the semi-tractors, and the state of the fifth-wheel coupling; parts for these classic series run through specialist Mercedes-Benz commercial-vehicle restorers and classic-vehicle parts exchanges.
Sources: SpecCodex register, model data: Mercedes-Benz LPS, Mercedes-Benz (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 2,400 mmcorrect |
|---|---|
| Wheelbase | 3,000 mmcorrect |
| Unladen weight | 5,230 kgcorrect |
| Gross vehicle weight | 14,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Mercedes Benz LPS 1418/30 weigh?
The unladen weight is 5,230 kg.
What is the gross vehicle weight of the Mercedes Benz LPS 1418/30?
14,500 kg.
What engine does the Mercedes Benz LPS 1418/30 have?
6 cylinders.
When was the Mercedes Benz LPS 1418/30 built?
Production years: 1966.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
