Technical register for agricultural, construction and commercial machinery · sourced data

Mercedes Benz 917 AF

Built: 1995 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Trucks 3.5–12 t (Class N2) series from Mercedes Benz includes the 917 AF. Production: 1995. The engine has 6 cylinders, with a displacement of 5,958 cm³. The vehicle is 7,800 mm long and 2,480 mm wide. The unladen weight is 5,351 kg. The wheelbase measures 4,220 mm. Top speed is 90 km/h. The gross vehicle weight is 9,500 kg. The vehicle runs on 6 wheels. The Trucks 3.5–12 t (Class N2) series covers 1532 models. Unladen weight within it ranges from 1,660 to 41,500 kg; the 917 AF sits at the bottom of that range with 5,351 kg. Its immediate neighbours are the ATEGO 818L 4X2/3620 below it with 5,350 kg and the 815 8,6T-97002/362 above it with 5,360 kg. Gross vehicle weight within it ranges from 3,505 to 12,000 kg; here the 917 AF sits in the upper part of that range with 9,500 kg. 8330 Mercedes Benz models across 126 series are on record.

The Düsseldorfer – Mercedes T2 and what the numbers mean: range 508 D to 813 D, four-cylinder OM 314 diesel, collective page of the N2 truck class from 3.5 to 12 tonnes

Anyone looking for a 508 D or 608 D is looking for the T2 — called "Düdo" by drivers and collectors, after the Düsseldorf plant where it was built from 1967 to 1991. The series ran until 1996, making it one of the longest-produced commercial vehicles in its class.

Read on 4 more paragraphs

The type designation is arithmetic: the first digit gives the permissible gross weight in tonnes, the following ones the engine output in metric horsepower. A 508 D is rated at 5 tonnes and around 80 hp, a 608 D with the same engine at 6 tonnes. The "D" stands for diesel. Technically, then, less separates them than the numbers suggest — the 608 D is essentially a more highly rated 508 D.

Under the bonnet of most of these vehicles sits the OM 314: a four-cylinder inline engine of 3,758 cc with direct injection, rated at 80 or 85 hp depending on version. It was the most popular choice in the first T2 generation and also appears in the O 309 bus. Anyone hunting for parts still benefits: an engine used across several series stays supplied longer than a one-off.

In 1986 an entirely new second generation arrived, built until 1996 and delivered mainly with diesel engines. When buying used it is therefore worth checking the year: a complete redesign lies between the first and second generation, even though both go by T2.

Register entries in this class come largely from official registration data. They are reliable on dimensions and weights — equipment details of individual vehicles are naturally not part of it.

Sources: SpecCodex register, model data: Mercedes-Benz Lkw 3,5–12 t (Klasse N2), Mercedes-Benz Trucks

Technical data

Engine

Cylinders6correct
Displacement5,958 cm³correct

Dimensions and weights

Length7,800 mmcorrect
Width2,480 mmcorrect
Wheelbase4,220 mmcorrect
Unladen weight5,351 kgcorrect
Gross vehicle weight9,500 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the Mercedes Benz 917 AF weigh?

The unladen weight is 5,351 kg.

What is the gross vehicle weight of the Mercedes Benz 917 AF?

9,500 kg.

What engine does the Mercedes Benz 917 AF have?

6 cylinders, 5,958 cm³ displacement.

How fast does the Mercedes Benz 917 AF go?

Top speed is 90 km/h.

What are the dimensions of the Mercedes Benz 917 AF?

7,800 mm × 2,480 mm.

When was the Mercedes Benz 917 AF built?

Production years: 1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Mercedes Benz 917 AF on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare