Mercedes Benz 416 CDI 4X4
Built: 2001-2006 · Series: Trucks up to 3.5 t (Class N1)
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz trucks up to 3.5 t (Class N1) – collective page from the Düsseldorf-built T1 van through the T2/Vario to the Sprinter: type codes such as 310 D, 410 and 416 CDI, engines from 48 to 135 kW
The EU vehicle class N1 covers trucks and vans up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Mercedes-Benz range recorded in that class. Two generations form the core: the T1, built in Düsseldorf from 1977 and popularly known as the “Düsseldorf van”, with type codes from 307 D to 609 D, superseded in the 1990s by the T2/Vario from Mannheim, and the Sprinter, built since 1995 with the more modern CDI codes such as 313 CDI, 316 CDI and 416 CDI. The type logic is similar across both generations: the leading digits roughly order the weight and power class, D stands for diesel, CDI for the later common-rail direct injection, the KA suffix marks panel-van versions, and 4X4 the four-wheel drive.
Read on 3 more paragraphs
The register lists 152 versions with kerb weights of 1,315 to 3,395 kg and gross vehicle weights of 3,200 to 3,500 kg, matching the upper limit of the class. Engine outputs are recorded for 34 of the models and range from 48 to 135 kW, displacements from 1,595 to 4,249 cm³ across 4 to 6 cylinders; width runs from 1,850 to 2,550 mm, and lengths are recorded for 79 models, from 4,470 to 7,920 mm.
As the lightest range in the Mercedes-Benz commercial vehicle programme, the T1/T2 competed chiefly with the Ford Transit and VW LT, while the Sprinter set the benchmark in the 3.5-tonne class from the mid-1990s and still serves today as the basis for motorhomes, ambulances and panel-van conversions.
On a used example, what matters on the older T1/T2 models is frame and floor corrosion and the condition of the propshaft, on the Sprinter the turbocharger and injectors of the CDI engines, plus the brakes, clutch, and on panel vans the condition of the load-area flooring; spare parts are readily available through the dense Mercedes-Benz service network.
Sources: SpecCodex register, model data: Mercedes-Benz Lkw bis 3,5 t (Klasse N1), Mercedes-Benz Trucks
Technical data
Engine
| Power | 115 kWcorrect |
|---|---|
| Cylinders | 5correct |
| Displacement | 2,685 cm³correct |
Dimensions and weights
| Length | 5,650 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Wheelbase | 3,550 mmcorrect |
| Unladen weight | 2,693 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 150 km/hcorrect |
Where this model stands
Power-to-weight ratio: 42.7 kW/t (115 kW / 2.7 t)
Stronger than 10% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mercedes Benz 416 CDI 4X4 have?
The Mercedes Benz 416 CDI 4X4 delivers 115 kW.
How much does the Mercedes Benz 416 CDI 4X4 weigh?
The unladen weight is 2,693 kg.
What is the gross vehicle weight of the Mercedes Benz 416 CDI 4X4?
3,500 kg.
What engine does the Mercedes Benz 416 CDI 4X4 have?
5 cylinders, 2,685 cm³ displacement.
How fast does the Mercedes Benz 416 CDI 4X4 go?
Top speed is 150 km/h.
What are the dimensions of the Mercedes Benz 416 CDI 4X4?
5,650 mm × 1,990 mm.
When was the Mercedes Benz 416 CDI 4X4 built?
Production years: 2001-2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
230 GE
290 GD
290 GD 4X4 3120
290GD
3 12 CDI-9036-3.5T-DOPPELKABINE/355
308D-3.5T-DOPPELKABINER/3050
310 D
310 DKA-3.5T-KASTEN-183-PK
310D-KA-903463
312 D-II
312D-KA-90346 -KASTEN/300
312D-KA-903462-3.2T-KASTEN/355
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
