Technical register for agricultural, construction and commercial machinery · sourced data
StartVansMercedes Benz › 208D

Mercedes Benz 208D (2291 kg)

Built: 1989–2004 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

208D from Mercedes Benz falls into the category Vans up to 3.5 t (Class N1). According to the available register data, the recorded vehicles date from 1989 to 2004. The van is 2,000 mm wide. Its kerb weight comes to 2,291 kg. Fully loaded, it may not exceed 2,950 kg. The engine has 4 cylinders, with a displacement of 2,300 cm³. Axle to axle, the wheelbase is 3,550 mm. It runs on 4 wheels. The Dutch vehicle register lists 14 examples of this model. Top speed is 129 km/h.

Sprinter and Vito — what the three-digit number says

On Mercedes vans the three-digit number is not a model name but a shorthand for two facts. The first digit gives the weight class, the following two the power class. A Sprinter 313 CDI produces 129 hp, a 316 CDI 156 hp — the number rises with engine output while the leading 3 holds the class.

Read on 3 more paragraphs

More important than the number for a used purchase, however, is the internal series code. W906 denotes the Sprinter generation from June 2006 to December 2019 — thirteen years under one code. W907 and W910 followed. Comparing two offers both called "Sprinter 313", look for the series code and the year, not the type number.

Within the W906 there was a technical break: from mid-2009 the four-cylinder diesels came with the OM 651 engine, coupled to a six-speed manual designed for commercial use. A 2008 vehicle and a 2012 one carry the same type designation and have different engines.

Entries in this class come largely from official registration data. Dimensions, weights and axle counts are reliable; equipment, body height and wheelbase of individual vehicles are not consistently recorded there and should be checked on the vehicle itself when buying.

Sources: DeWiki: Mercedes-Benz Sprinter, auto-wiki: W906, ADAC

Technical data

Engine

Cylinders4correct
Displacement2,300 cm³correct

Dimensions and weights

Width2,000 mmcorrect
Wheelbase3,550 mmcorrect
Unladen weight2,291 kgcorrect
Gross vehicle weight2,950 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed129 km/hcorrect

Frequently asked questions

How much does the Mercedes Benz 208D weigh?

The unladen weight is 2,291 kg.

What is the gross vehicle weight of the Mercedes Benz 208D?

2,950 kg.

What engine does the Mercedes Benz 208D have?

4 cylinders, 2,300 cm³ displacement.

How fast does the Mercedes Benz 208D go?

Top speed is 129 km/h.

When was the Mercedes Benz 208D built?

Production years: 1989–2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare