KOEGEL AHW 20KN MVHT
Built: 1994 · Series: Other models
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kögel – other models: the collective page of semi-trailers outside the named ranges, from curtainsiders and box trailers to the Port container chassis in Simplex, Duplex and Triplex versions, unladen weights 1.37 to 11.8 t, gross weights up to 66 t
Kögel of Burtenbach in Bavarian Swabia has been one of Germany's major semi-trailer builders since its founding in 1934 and, alongside Schmitz Cargobull and Krone, ranks among the leading names of the commercial-vehicle body industry. This page gathers the Kögel models the register could not assign to a named range – from curtainsiders through box bodies to tippers and the Port range of container chassis. The type logic combines letters for the body type with numbers for the payload class, though not every combination can be reliably reconstructed today; the Port models with the suffixes Simplex, Duplex and Triplex denote, by the naming logic, container chassis for 40-foot ISO containers with one, two or three axle lines.
Read on 3 more paragraphs
The register lists here 136 versions with unladen weights from 1,370 to 11,810 kg, gross weights from 3,500 to 66,000 kg, lengths from 3,930 to 14,300 mm (recorded for 112 models) and widths from 2,300 to 2,600 mm.
Kögel thus covers the full breadth of the semi-trailer market – from the light curtainsider for general cargo to the heavy low-loader for construction machinery and abnormal loads, while specialised versions such as the container chassis serve mainly port-hinterland traffic.
On used semi-trailers, the frame and axle beams for corrosion, the brake system and EBS electronics, air-suspension bellows and dampers, the condition of landing legs and kingpin, the tarpaulin and stanchions on curtainsiders, the floor on box bodies, and the twistlocks and locking gear on container chassis all count; parts run through the Kögel service network.
Sources: Kennwerte der Modelle Kögel (weitere Modelle), Kögel Trailer (Hersteller)
Technical data
Dimensions and weights
| Width | 2,400 mmcorrect |
|---|---|
| Unladen weight | 1,680 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the KOEGEL AHW 20KN MVHT weigh?
The unladen weight is 1,680 kg.
What is the gross vehicle weight of the KOEGEL AHW 20KN MVHT?
3,500 kg.
Up to what speed is the KOEGEL AHW 20KN MVHT approved?
Approved up to 100 km/h.
When was the KOEGEL AHW 20KN MVHT built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
15 KN AD
15 KN WT
15KN-AD
ACT 11
ACT 12,6
AHW 15KN WT
AN 18
ANBS 18
AW 18
AW 18 - 22,5'
AW 18-19,5
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.