KOCH ANHAENGER 7.20H
Built: 2021 · Series: Other models
More machines from model year 2021
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Koch Anhänger – other models: the collective page outside the named ranges, 7.20H and B8 N, 410 to 500 kg unladen weight at 2,000 to 2,600 kg gross weight, 4,430 to 4,620 mm length
This page gathers the Koch Anhänger trailers the register could not assign to a named range – with only two versions it covers the whole recorded model programme. The types 7.20H and B8 N follow an internal factory code logic.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 410 to 500 kg, gross weights from 2,000 to 2,600 kg, lengths from 4,430 to 4,620 mm and widths from 2,000 to 2,040 mm.
With gross weights of 2,000 to 2,600 kg, both versions fall into class O2, the braked trailer class behind cars and vans. The low unladen weight of 410 to 500 kg against the far higher gross weight points to a light, open frame construction with a large payload reserve, as is usual on car- or boat-transport trailers. With a category B licence, trailers of this weight class require the additional code 96 or category BE once the combined weight of tow vehicle and trailer exceeds 3,500 kg.
On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame and drawbar, and the state of lighting, plug, tyres and rims all count. On open frame constructions with a high payload, checking the welds at the load-bearing points is also worthwhile; parts for such a small brand usually run through independent trailer workshops. The condition of the coupling head and the safety cable is also worth checking at every viewing.
Sources: SpecCodex register, model data: KOCH ANHAENGER (weitere Modelle)
Technical data
Dimensions and weights
| Length | 4,430 mmcorrect |
|---|---|
| Width | 2,040 mmcorrect |
| Wheelbase | 3,210 mmcorrect |
| Unladen weight | 410 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 140 km/hcorrect |
Frequently asked questions
How much does the KOCH ANHAENGER 7.20H weigh?
The unladen weight is 410 kg.
What is the gross vehicle weight of the KOCH ANHAENGER 7.20H?
2,000 kg.
Up to what speed is the KOCH ANHAENGER 7.20H approved?
Approved up to 140 km/h.
What are the dimensions of the KOCH ANHAENGER 7.20H?
4,430 mm × 2,040 mm.
When was the KOCH ANHAENGER 7.20H built?
Production years: 2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
