Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Kloeckner Deutz › Other models › F MERCUR 125

Kloeckner Deutz F MERCUR 125

Built: 1960 · Series: Other models

More machines from model year 1960

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The F MERCUR 125 comes from Kloeckner Deutz. Production: 1960. The engine has 6 cylinders, with a displacement of 7,983 cm³. The vehicle is 8,550 mm long and 2,550 mm wide. The unladen weight is 8,640 kg. The wheelbase measures 4,850 mm. The gross vehicle weight is 10,000 kg. The vehicle runs on 4 wheels. Unladen weight across the Kloeckner Deutz range ranges from 3,900 to 14,400 kg; the F MERCUR 125 sits in the middle of that range with 8,640 kg. Its immediate neighbours are the MAGIRUS 170 D 15AK/1 below it with 6,750 kg and the 170 D 12 F above it with 11,335 kg. Gross vehicle weight across the Kloeckner Deutz range ranges from 4,575 to 15,150 kg; here the F MERCUR 125 sits in the middle of that range with 10,000 kg. 10 Kloeckner Deutz models are on record.

Klöckner-Deutz – further truck models: the collection page of the Cologne Deutz group with Magirus vehicles beyond the named ranges, air-cooled Deutz diesel engines, 3,744 to 12,579 cm³, up to 15,150 kg gross weight

This page brings together trucks of the Klöckner-Humboldt-Deutz group not assigned to any named range, including several models explicitly marked as Magirus. The Cologne engine maker Deutz took a majority stake in the Ulm commercial vehicle builder Magirus in 1936, out of which the joint brand Magirus-Deutz emerged and, after Fiat's takeover, eventually Iveco Magirus. Engine designations such as F 6 L 613 follow Deutz's own system: the cylinder count before the L for air cooling, followed by the series number; the vehicle designations themselves usually state power in horsepower and gross weight class, with X6 or 6X6 denoting all-wheel drive.

Read on 3 more paragraphs

The register lists ten versions with four- to eight-cylinder engines displacing 3,744 to 12,579 cm³. Kerb weights range from 3,900 to 14,400 kg, gross vehicle weights from 4,575 to 15,150 kg, lengths from 6,020 to 8,550 mm and widths from 2,200 to 2,550 mm.

Deutz diesel engines were valued for their air cooling especially in regions of extreme temperature and on construction sites, where a liquid cooling system would have meant extra maintenance. The Magirus and Klöckner-Deutz chassis gathered here occupied the medium- to heavy-duty segment in construction, fire service and all-wheel-drive applications, alongside Mercedes-Benz, MAN and the early Faun vehicles.

On the air-cooled Deutz engines, the cooling fan belts and cylinder head gaskets are critical checkpoints, since leaks lead to overheating faster than on liquid-cooled units. The frame, transfer case and drive gearing of the 6x6 variants should be checked for play and oil leaks. Parts for the Deutz engines are available through the Deutz distribution network and specialist vintage commercial-vehicle workshops, while body and cab parts for the Magirus vehicles are now mostly limited to salvage.

Sources: SpecCodex register, model data: Klöckner-Deutz (weitere Modelle), Deutz (Hersteller der Motoren)

Technical data

Engine

Cylinders6correct
Displacement7,983 cm³correct

Dimensions and weights

Length8,550 mmcorrect
Width2,550 mmcorrect
Wheelbase4,850 mmcorrect
Unladen weight8,640 kgcorrect
Gross vehicle weight10,000 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Kloeckner Deutz F MERCUR 125 weigh?

The unladen weight is 8,640 kg.

What is the gross vehicle weight of the Kloeckner Deutz F MERCUR 125?

10,000 kg.

What engine does the Kloeckner Deutz F MERCUR 125 have?

6 cylinders, 7,983 cm³ displacement.

What are the dimensions of the Kloeckner Deutz F MERCUR 125?

8,550 mm × 2,550 mm.

When was the Kloeckner Deutz F MERCUR 125 built?

Production years: 1960.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare