Technical register for agricultural, construction and commercial machinery · sourced data

KAROSSERIEWERKE DRESDEN HP1085

Built: 1987–1990 · Series: Other models

More machines from model year 1987

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

HP1085 comes from the manufacturer KAROSSERIEWERKE DRESDEN. According to the available register data, the recorded vehicles date from 1987 to 1990. The trailer is 2,160 mm wide. Its kerb weight comes to 860 kg. Fully loaded, it may not exceed 1,000 kg. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists 15 examples of this model.

Karosseriewerke Dresden – other models: the collective page of East German trailers outside the named ranges, IFA 390 types and the HP range, 530 to 920 kg unladen weight, 800 to 2,000 kg gross weight

This page gathers the Karosseriewerke Dresden trailers the register could not assign to a named range. The designation I.F.A. 390 L refers to the Industrieverband Fahrzeugbau, East Germany's vehicle-industry association, under which the Karosseriewerke Dresden built its vehicles; alongside it the register lists the HP range (HP 1085, HP 1385, HP 8083) and the K 450 A type.

Read on 3 more paragraphs

The register lists 14 versions with unladen weights from 530 to 920 kg, gross weights from 800 to 2,000 kg and widths from 2,000 to 2,290 mm.

Trailers of this weight class served as car and agricultural trailers for transport and general cargo in East Germany and are still used today as collector vehicles and in everyday service; the variety of IFA and HP designations reflects the centralised production structure of the East German vehicle industry. Many versions continued in private use or were restored after 1990, so condition and paperwork vary considerably from one vehicle to the next.

On a used trailer, the condition of the axle, brake and overrun brake device, rust on the frame and side panels after decades of service, the function of the lighting system, and tyres and wheel bearings all count; on these historic types the parts supply through collector and vintage-vehicle networks also needs checking. On these types, matching the chassis number to the vehicle papers also deserves particular attention.

Sources: SpecCodex register, model data: Karosseriewerke Dresden (weitere Modelle)

Technical data

Dimensions and weights

Width2,160 mmcorrect
Unladen weight860 kgcorrect
Gross vehicle weight1,000 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the KAROSSERIEWERKE DRESDEN HP1085 weigh?

The unladen weight is 860 kg.

What is the gross vehicle weight of the KAROSSERIEWERKE DRESDEN HP1085?

1,000 kg.

Up to what speed is the KAROSSERIEWERKE DRESDEN HP1085 approved?

Approved up to 100 km/h.

When was the KAROSSERIEWERKE DRESDEN HP1085 built?

Production years: 1987–1990.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare