Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › IRMER + ELZE › 868584

IRMER + ELZE 868584

Built: 2007 · Series: Other models

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

868584 comes from the manufacturer IRMER + ELZE. According to the available register data, the vehicle dates from 2007. The trailer is 1,400 mm wide. The unladen weight is 850 kg. The permitted gross weight is 1,050 kg. Top speed is 100 km/h. The Dutch vehicle register lists 2 examples of this model.

Irmer + Elze – other models: a collector page for the German trailer builder, 28 versions from short numeric codes to the IRMAIR and S-SLS series, unladen weight 720 to 2,000 kg

This page gathers models from the German trailer builder Irmer + Elze that the register could not assign to a named series. The range spans short, purely numeric type codes, the CPS and IRMAIR names, and the S-SLS series with suffixes such as 281 SLS or 551-SLS. Unbraked versions stay below 750 kg gross weight, while the largest models in the range reach up to 2,000 kg as braked trailers.

Read on 3 more paragraphs

The register lists 28 versions with unladen weights from 720 to 2,000 kg and gross weights from 830 to 2,000 kg. Widths range from 1,100 to 1,810 mm.

Trailers in this weight class sit between a simple car trailer and a light building or transport trailer, and are used both unbraked and braked within category B or BE driving licences. The resale value of such general-purpose trailers depends chiefly on the condition of the load floor and the completeness of fittings such as ramps or a tarpaulin. Trailers of this kind serve trades, building sites and private transport alike.

When buying used, check the frame and welds, axles, brakes and lighting, load floor and side panels, and the gross-weight rating on the type plate; spare parts are available from specialist trailer-equipment dealers. On braked versions, also check the overrun braking device and the function of the reverse-release mechanism.

Sources: Kennwerte der Modelle Irmer + Elze (weitere Modelle)

Technical data

Dimensions and weights

Width1,400 mmcorrect
Unladen weight850 kgcorrect
Gross vehicle weight1,050 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the IRMER + ELZE 868584 weigh?

The unladen weight is 850 kg.

What is the gross vehicle weight of the IRMER + ELZE 868584?

1,050 kg.

Up to what speed is the IRMER + ELZE 868584 approved?

Approved up to 100 km/h.

When was the IRMER + ELZE 868584 built?

Production years: 2007.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare