Humbaur -
Built: 2008 · Series: Other models
Technical data
Dimensions and weights
| Length | 8,320 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 990 mmcorrect |
| Unladen weight | 3,130 kgcorrect |
| Gross vehicle weight | 10,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Humbaur - weigh?
The unladen weight is 3,130 kg.
What is the gross vehicle weight of the Humbaur -?
10,500 kg.
Up to what speed is the Humbaur - approved?
Approved up to 100 km/h.
What are the dimensions of the Humbaur -?
8,320 mm × 2,550 mm.
When was the Humbaur - built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-HTK135524 TA-BE
HBT 11???? BE
HBT 11???? BS
HBT 11???? BS SCHRAEG
HBT10
HBTZ 14???? BS SCHR�G
HBTZ 196524 BS SCHR�G
HBTZ 217224 BS SCHR?G
HS694020
HSA 2006
HSA 351324
HSA2006
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.