Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Hab › H.A.B 10 10

Hab H.A.B 10 10

Built: 1981 · Series: Other models

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Hab builds the H.A.B 10 10. According to the available register data, the vehicle dates from 1981. Dimensions: 2,020 mm wide. The unladen weight is 510 kg. The permitted gross weight is 2,000 kg. It reaches up to 100 km/h. It runs on 2 wheels. According to the Dutch vehicle register, one example of this model is on record.

HAB – other models: trailers outside the named ranges, the type spellings H A B, H.A.B. and HAB 10-10, unladen weights from 510 to 2,570 kg, gross weights from 1,500 to 3,500 kg

This page gathers the trailers of the brand HAB the register could not assign to a named range. The type designations appear in the register in varying spelling, with and without spaces or full stops, for example as H A B 1.0-1.0, H.A.B. 2000, HAB 1,0-1,0, HAB 10-10 or simply HAB, alongside the shorter codes HA, HA A and HE. The number pairs after the brand name visibly follow the pattern of unladen weight and payload in tonnes.

Read on 3 more paragraphs

The register lists here 14 versions with unladen weights from 510 to 2,570 kg, gross weights from 1,500 to 3,500 kg and widths from 1,780 to 2,250 mm.

In this weight class between a light small trailer and the classic 3.5-tonne car trailer of EU class O2, the models serve to carry building material, garden waste, machinery or vehicles and are towed with an ordinary car driving licence, category B or BE. The braked versions from around 1,500 kg gross weight need their own overrun brake system.

On a used trailer, the frame for rust and distortion, axles and wheel bearings, the overrun brake device and brake system on braked versions, the sides and load floor for wear, and lighting, the number-plate holder and the coupling head all count; several of the short codes reappear in the register under a different spelling, so closely related variants are listed separately.

Sources: Kennwerte der Modelle HAB (weitere Modelle)

Technical data

Dimensions and weights

Width2,020 mmcorrect
Unladen weight510 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Hab H.A.B 10 10 weigh?

The unladen weight is 510 kg.

What is the gross vehicle weight of the Hab H.A.B 10 10?

2,000 kg.

Up to what speed is the Hab H.A.B 10 10 approved?

Approved up to 100 km/h.

When was the Hab H.A.B 10 10 built?

Production years: 1981.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare