Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersGERMANIA › ANIMAL IV

GERMANIA ANIMAL IV

Built: 1982 · Series: Other models

More machines from model year 1982

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

GERMANIA builds the ANIMAL IV. According to the available register data, the vehicle dates from 1982. Dimensions: 1,800 mm wide. Empty, it weighs 520 kg. The permitted gross weight is 1,200 kg. It reaches up to 100 km/h. According to the Dutch vehicle register, one example of this model is on record.

Germania – other models: the collective page of livestock trailers outside the named ranges, the Animal model family plus Runner and Senior, 380 to 1,060 kg unladen weight, 1.2 to 2.8 t gross weight

This page gathers the Germania trailers the register could not assign to a named range. The core of the range is the Animal model family in the I, II and IV versions, supplemented by the Runner and Senior families and the numerically named types M 2500, M 2800 and S 1600. One entry also carries the company name Germania-Fahrzeugbau directly as the type designation.

Read on 3 more paragraphs

The register lists here 21 versions with unladen weights from 380 to 1,060 kg, gross weights from 1,200 to 2,800 kg and widths from 1,800 to 2,450 mm.

The Animal model family points to the main purpose of these trailers: transporting cattle and other livestock, for which enclosed or part-enclosed bodies with ventilation, a non-slip floor and adequate headroom are needed. The weight class up to 2.8 tonnes gross weight corresponds to trailers for one or two large animals or a correspondingly larger number of smaller ones. Access on livestock trailers of this size is usually through a rear loading flap that doubles as a ramp.

On a used livestock trailer, the condition of the floor (corrosion and moisture under the rubber mat), the ventilation, the partitions and their latches, the axle, suspension and brakes, and the frame and drawbar for corrosion all count in particular, along with the function of the loading flap and its latch.

Sources: Kennwerte der Modelle Germania (weitere Modelle)

Technical data

Dimensions and weights

Width1,800 mmcorrect
Unladen weight520 kgcorrect
Gross vehicle weight1,200 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the GERMANIA ANIMAL IV weigh?

The unladen weight is 520 kg.

What is the gross vehicle weight of the GERMANIA ANIMAL IV?

1,200 kg.

Up to what speed is the GERMANIA ANIMAL IV approved?

Approved up to 100 km/h.

When was the GERMANIA ANIMAL IV built?

Production years: 1982.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare