Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersGebre › MP25.05.51

Gebre MP25.05.51

Built: 1987 · Series: Other models

More machines from model year 1987

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

MP25.05.51 comes from the manufacturer Gebre. According to the available register data, the vehicle dates from 1987. The trailer is 1,620 mm wide. The unladen weight is 750 kg. The permitted gross weight is 1,800 kg. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists one example of this model.

Gebre – other models: the collective page of light trailers outside the named ranges, the JG and K type series, 0.38 to 1.2 t unladen weight, up to 3.5 t gross weight

This page gathers the Gebre trailers the register could not assign to a named range. The programme consists of light trailers in the JG and K type series across various size classes plus the D 2000 model and the MP25.05.51; all versions fall within the range up to 3.5 tonnes gross weight. With 13 models listed, this is one of the maker's more extensive collective pages, and unladen weights from 380 to 1,220 kg show a fine gradation within the light class.

Read on 3 more paragraphs

The register lists here 13 versions with unladen weights from 380 to 1,220 kg, gross weights from 1,000 to 3,500 kg and widths from 1,620 to 2,500 mm.

Light trailers of this class can be towed on an ordinary car licence and serve trade businesses, smallholders and private users for haulage tasks, from building-material transport to garden trailers. The close gradation of unladen weights across the programme lets buyers pick exactly the payload needed for the job at hand, without towing unnecessary extra dead weight.

On used light trailers, the condition of the galvanised chassis matters, the function of the overrun brake device and the brake, axle and tyres, lighting, and the hinges of side panels and the tailgate. On the smaller versions, the tow eye is also worth checking for wear; spare parts run through the independent specialist trailer trade.

Sources: Kennwerte der Modelle Gebre (weitere Modelle)

Technical data

Dimensions and weights

Width1,620 mmcorrect
Unladen weight750 kgcorrect
Gross vehicle weight1,800 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Gebre MP25.05.51 weigh?

The unladen weight is 750 kg.

What is the gross vehicle weight of the Gebre MP25.05.51?

1,800 kg.

Up to what speed is the Gebre MP25.05.51 approved?

Approved up to 100 km/h.

When was the Gebre MP25.05.51 built?

Production years: 1987.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare