EXCALIBUR S1/13
Built: 2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Excalibur – other models: the collective page of trailers outside the named ranges, the S1 and S2 ranges following gross weight from 1,300 to 1,800 kg, 450 to 580 kg unladen weight
This page gathers the Excalibur trailers the register could not assign to a named range. The S1 and S2 ranges, with the number attached, follow the gross weight in kilograms – S1 1300 and S1 1500 in the lighter version, S2 1500 and S2 1800 in the heavier – and alongside them the register lists the D*Sign type as a separate model.
Read on 3 more paragraphs
The register lists 14 versions with unladen weights from 450 to 580 kg, gross weights from 1,300 to 1,800 kg, lengths from 5,080 to 5,200 mm and widths from 2,080 to 2,500 mm.
Trailers of this weight class serve as braked car trailers for transport and building loads and small machinery; the split into S1 and S2 by gross weight eases the choice between the lighter and heavier version at a similar unladen weight and therefore favourable payload. The close type logic also eases resale, since buyers can read the permitted payload directly from the type designation.
On a used trailer, the condition of the axle, brake and overrun brake device, rust on the frame and side panels, the function of the lighting system, and tyres and wheel bearings all count; the type designation by S1 or S2 and gross weight should match the details in the registration document. On the D*Sign type, the condition of the special paint finish and any extra equipment should also be checked.
Technical data
Dimensions and weights
| Width | 2,080 mmcorrect |
|---|---|
| Wheelbase | 3,350 mmcorrect |
| Unladen weight | 450 kgcorrect |
| Gross vehicle weight | 1,300 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the EXCALIBUR S1/13 weigh?
The unladen weight is 450 kg.
What is the gross vehicle weight of the EXCALIBUR S1/13?
1,300 kg.
Up to what speed is the EXCALIBUR S1/13 approved?
Approved up to 100 km/h.
When was the EXCALIBUR S1/13 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
D*SIGN
ECCALIBUR S1,S2/15,S2/IB
EXCALIBUR
EXCALIBUR S 2 1800
EXCALIBUR S1 1300
EXCALIBUR S1 1500
EXCALIBUR S2 1500
EXCALIBUR S2 1800
EXCALIBUR S2/15
S1
S2
S2 1500
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.