ERIBA LIVING 485
Built: 2018–2019 · Series: Trailers up to 3.5 t (Class O2)
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eriba O2-class caravans – Hymer-brand trailers from Bad Waldsee up to 3.5 t gross weight: GT and Nova trim lines, weights from 490 to 2,390 kg, lengths up to 8.83 m
Eriba is a Hymer brand based in Bad Waldsee, traditionally known for particularly compact, lightweight caravans. The “Class O2” collector page lists every Eriba model recorded in the registration data from the Netherlands and Finland as an EU Class O2 trailer, with a gross weight of 0.75 to 3.5 tonnes. The type logic uses numeric codes for series and floorplan, supplemented by trim lines such as GT and Nova, which appear in the register as standalone model designations.
Read on 3 more paragraphs
The register lists 493 versions with unladen weights from 490 to 2,390 kg, gross weights from 760 to 2,800 kg and widths from 1,820 to 2,530 mm; length figures are available for 207 vehicles and range from 4,500 to 8,830 mm.
Eriba positions itself in the market as a light, aerodynamically shaped alternative to the larger family caravans of other brands, appealing mainly to buyers who value a low towing weight; the weight range is correspondingly lower than that of Tabbert or Adria. Within the Hymer Group, Eriba complements the Bürstner and LMC brands in the compact segment.
When buying used, check for moisture at the floor, wall and roof joints, the condition of window and roof-hatch seals, and a valid gas-system inspection. The hitch coupling and brakes, including the handbrake cable, belong on the list too, as does tyre age under the six-year rule. Tap the floor panel for soft spots and check the 12 V and 230 V electrics; parts for current models are supplied through the Hymer dealer network, while older, compact series often rely only on specialised independent workshops.
Sources: Kennwerte der Modelle ERIBA Anhänger bis 3,5 t (Klasse O2), Eriba (Hymer, Hersteller)
Technical data
Dimensions and weights
| Length | 7,240 mmcorrect |
|---|---|
| Width | 2,330 mmcorrect |
| Wheelbase | 4,360 mmcorrect |
| Unladen weight | 1,190 kgcorrect |
| Gross vehicle weight | 1,700 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 120 km/hcorrect |
Frequently asked questions
How much does the ERIBA LIVING 485 weigh?
The unladen weight is 1,190 kg.
What is the gross vehicle weight of the ERIBA LIVING 485?
1,700 kg.
Up to what speed is the ERIBA LIVING 485 approved?
Approved up to 120 km/h.
What are the dimensions of the ERIBA LIVING 485?
7,240 mm × 2,330 mm.
When was the ERIBA LIVING 485 built?
Production years: 2018–2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.