Chevrolet Itasca 25 FT
Built: 1977 · Series: Other models
More machines from model year 1977
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chevrolet Itasca 25 FT – a motorhome on a Chevrolet chassis: eight-cylinder engine, gross weight 4,990 kg, wheelbase 3,990 mm, built 1977
Chevrolet Itasca 25 FT is a motorhome built on a Chevrolet chassis. Itasca is a motorhome nameplate of the American manufacturer Winnebago Industries of Forest City, Iowa, which has fitted its living quarters onto chassis from large US makers such as Chevrolet since the 1970s. In the US motorhome industry, a model designation such as 25 FT typically indicates the approximate vehicle length in feet.
Read on 3 more paragraphs
For this 1977 model the register lists an eight-cylinder engine. Kerb weight is 4,360 kg, gross vehicle weight 4,990 kg, wheelbase 3,990 mm, and width 2,400 mm.
The V8 engine was the standard choice for US motorhomes of this era, because the weight of the complete living compartment, with its kitchen, seating area and sleeping section mounted on the chassis, called for a strong yet smooth-running unit. Between kerb and gross weight only around 600 kg of headroom remains for payload, water, gas and luggage, which is typical for a fully equipped motorhome of this age.
For a used example, check for damp and corrosion at the join between the driving cab and the living compartment, the condition of the chassis and suspension under the load of the body, brake system operation, and the seals of the roof, windows and body walls. Drivetrain parts run through the Chevrolet dealer network, while parts for the living compartment are now only available through specialist motorhome restorers.
Sources: SpecCodex-Register: Kennwerte des Modells Chevrolet Itasca 25 FT
Technical data
Engine
| Cylinders | 8correct |
|---|
Dimensions and weights
| Width | 2,400 mmcorrect |
|---|---|
| Wheelbase | 3,990 mmcorrect |
| Unladen weight | 4,360 kgcorrect |
| Gross vehicle weight | 4,990 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Chevrolet Itasca 25 FT weigh?
The unladen weight is 4,360 kg.
What is the gross vehicle weight of the Chevrolet Itasca 25 FT?
4,990 kg.
What engine does the Chevrolet Itasca 25 FT have?
8 cylinders.
When was the Chevrolet Itasca 25 FT built?
Production years: 1977.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
