Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersBURO › A5A5A5

BURO A5A5A5

Built: 1974–1979 · Series: Other models

More machines from model year 1974

The photo shows the AGA6A6 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/bauwagen-bueroanhaeng

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

A5A5A5 comes from the manufacturer BURO. According to the available register data, the recorded vehicles date from 1974 to 1979. The trailer is 2,100 mm wide. Its kerb weight comes to 848 kg. The permitted gross weight is 1,900 kg. The wheelbase measures 720 mm. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists 31 examples of this model.

Buro – other models: the collective page of trailers outside the named ranges, the A and BU type series, 410 to 892 kg unladen weight, 1,900 to 2,000 kg gross weight, widths up to 2,200 mm

This page gathers the Buro trailers the register could not assign to a named range. The type plates follow a letter-number scheme with A and BU as prefixes followed by further codes; the line-up thus forms a single model family with fine gradations within the same basic design.

Read on 3 more paragraphs

The register lists here 12 versions with unladen weights from 410 to 892 kg, gross weights from 1,900 to 2,000 kg and widths from 1,910 to 2,200 mm.

With an almost uniform gross weight of around 1,900 to 2,000 kg and unladen weights between 410 and 892 kg, the payload of the Buro trailers ranges, depending on the version, from a little over one tonne to just under one and a half tonnes. This narrow band points to a programme offering one fixed weight class in several fit-out levels rather than covering different size classes.

On a used example of this class, the condition of the overrun coupling and service brake, rust on the frame and sides, the age and play of the wheel bearings, and the condition and tread depth of the tyres all count. Because the models are graded by unladen weight on the same gross weight, it is also worth checking at purchase whether the payload and intended use match the particular version. A look at the lashing points and the condition of the floor boards or floor pan rounds off the check, as these parts wear differently depending on their previous use.

Sources: Kennwerte der Modelle Buro (weitere Modelle)

Technical data

Dimensions and weights

Width2,100 mmcorrect
Wheelbase720 mmcorrect
Unladen weight848 kgcorrect
Gross vehicle weight1,900 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the BURO A5A5A5 weigh?

The unladen weight is 848 kg.

What is the gross vehicle weight of the BURO A5A5A5?

1,900 kg.

Up to what speed is the BURO A5A5A5 approved?

Approved up to 100 km/h.

When was the BURO A5A5A5 built?

Production years: 1974–1979.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare