Start › Trailers › BMS › WORKER NO. 1

BMS WORKER NO. 1

Built: 2012 · Series: Other models

More machines from model year 2012

The photo shows the ALPHA CR FLUID STANDARD from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/fliessestrichmaschine

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

WORKER NO. 1 comes from the manufacturer BMS. According to the available register data, the vehicle dates from 2012. The trailer is 1,530 mm wide. The unladen weight is 1,600 kg. The permitted gross weight is 1,600 kg. The wheelbase measures 2,900 mm. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists one example of this model.

Technical data

Dimensions and weights

Width1,530 mmcorrect
Wheelbase2,900 mmcorrect
Unladen weight1,600 kgcorrect
Gross vehicle weight1,600 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the BMS WORKER NO. 1 weigh?

The unladen weight is 1,600 kg.

What is the gross vehicle weight of the BMS WORKER NO. 1?

1,600 kg.

Up to what speed is the BMS WORKER NO. 1 approved?

Approved up to 100 km/h.

When was the BMS WORKER NO. 1 built?

Production years: 2012.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

260/4.6/4/K

ALPHA 74 FLUID

ALPHA CR FLUID

ALPHA CR FLUID STANDARD

ALPHA CR FUID

ALPHA CR STANDARD

ALPHA E32 STANDARD

ALPHA Z3

ALPHA Z3 STANDARD

ALPHA Z4 FLUID

N/A

WORKER NO.1 FLUID

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare