Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersBERGLAND › 380M.K.T.

BERGLAND 380M.K.T.

Built: 1988 · Series: Other models

More machines from model year 1988

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

BERGLAND builds the 380M.K.T.. According to the available register data, the vehicle dates from 1988. Dimensions: 2,100 mm wide. Its kerb weight comes to 717 kg. Fully loaded, it may not exceed 1,100 kg. It reaches up to 100 km/h. It runs on 2 wheels. According to the Dutch vehicle register, 4 examples of this model are on record.

Bergland – other models: agricultural tipping trailers of the 300 to 395 type range (EKT/KKT/MKT), 280 to 1,740 kg kerb weight, gross weights up to 2,500 kg

Bergland builds agricultural and commercial tipping trailers; this collective page gathers models outside the named series. The model names consist consistently of three-digit numbers from 300 to 395 with letter additions such as EKT, KKT and MKT, plus name additions like "Mont Blanc" marking individual equipment lines. All models are built as tipping trailers with hydraulic tipping gear, side panels and an overrun brake, of the kind towed behind agricultural tractors.

Read on 3 more paragraphs

The register lists 119 versions with kerb weights from 280 to 1,740 kg and gross weights from 800 to 2,500 kg. Widths run from 1,840 to 2,850 mm; 16 models additionally carry lengths from 4,390 to 7,650 mm.

This size bracket matches classic agricultural tipping trailers towed behind tractors to move crops, manure or excavated soil. The fine gradation of type numbers shows a modular system offering farmers and contractors payloads matched to different tractors.

When buying used, check the tipping mechanism and hydraulic ram, the load-bed panels for rust-through, and the side-panel hinges. The overrun brake, brake cables and lighting should be inspected, along with the drawbar and jockey wheels. Spare parts for axles and tipping rams are stocked by agricultural dealers and independent trailer-parts suppliers. Wheel bearings and tyre condition are worth an additional check, since many of these trailers see long service lives on farms.

Sources: Kennwerte der Modelle Bergland (weitere Modelle)

Technical data

Dimensions and weights

Width2,100 mmcorrect
Unladen weight717 kgcorrect
Gross vehicle weight1,100 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the BERGLAND 380M.K.T. weigh?

The unladen weight is 717 kg.

What is the gross vehicle weight of the BERGLAND 380M.K.T.?

1,100 kg.

Up to what speed is the BERGLAND 380M.K.T. approved?

Approved up to 100 km/h.

When was the BERGLAND 380M.K.T. built?

Production years: 1988.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare