Bacar Burcht DSW 3500 EA
Built: 1994 · Series: Other models
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bacar Burcht – other models: the collective page of trailers outside the named ranges with the DSW, TA, EA and OLV/OLC lines, 1,380 to 4,380 kg kerb weight, up to 5.1 t gross weight
This page gathers the Bacar Burcht trailers the register could not assign to its own named range. The type designations cluster around several abbreviations: DSW with an attached weight figure and the suffix EA, T or VC (DSW 2000 EA to DSW 3500 EA, DSW 3500 T, DSW2600VC), alongside the TA line (TA 2000, TA 3000), EA (EA 1500), and OLV and OLC (OLV 5100 TA, OLC 5100 EA).
Read on 3 more paragraphs
The register lists 14 versions with kerb weights from 1,380 to 4,380 kg, gross vehicle weights from 1,500 to 5,100 kg and widths from 1,520 to 2,430 mm.
With kerb weights from 1.4 tonnes, the Bacar Burcht programme sits in the heavier segment of commercial trailers, well above light car trailers. As a collective brand without a named range, the manufacturer sits in the register alongside other suppliers of twin-axle transport trailers for agriculture and trade.
When buying used at these weights, check above all the condition and load capacity of the axles, the function of the brake system, corrosion on the frame and load platform, and the condition of ramps and lashing points. On the heavier DSW and OLV versions, any hydraulic tipping or ramp function, where fitted, is worth an additional look. Parts for axles and brakes at this payload class are usually sourced through specialist commercial-vehicle workshops.
Sources: SpecCodex register, model data: Bacar Burcht (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,350 mmcorrect |
|---|---|
| Wheelbase | 4,470 mmcorrect |
| Unladen weight | 2,800 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bacar Burcht DSW 3500 EA weigh?
The unladen weight is 2,800 kg.
What is the gross vehicle weight of the Bacar Burcht DSW 3500 EA?
3,500 kg.
Up to what speed is the Bacar Burcht DSW 3500 EA approved?
Approved up to 100 km/h.
When was the Bacar Burcht DSW 3500 EA built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
