Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersABLAS › ASS2

ABLAS ASS2

Built: 1988 · Series: Other models

More machines from model year 1988

The photo shows the KI 6 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/anhaenger-6-00m-autoa

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

ABLAS builds the ASS2. According to the available register data, the vehicle dates from 1988. Dimensions: 2,160 mm wide. The unladen weight is 659 kg. The permitted gross weight is 2,000 kg. It reaches up to 100 km/h. It runs on 2 wheels. According to the Dutch vehicle register, one example of this model is on record.

Ablas – other models: the collective page of trailers outside the named ranges, type codes A, D, K, P, T and V, unladen weights from 270 to 984 kg, gross weights from 1,200 to 2,000 kg

This page gathers the Ablas trailers the register could not assign to a named range. The type names take the form of short, mostly one- to three-character codes with the prefixes A, D, K, P, T and V – such as P 1, P 2, T 11, T 2 or V 3 S – and many variants carry the suffix AL or differ only in spacing, punctuation and hyphenation; one version is recorded as DERCKS ABLAS. This variety of notation reflects a model range of small and medium trailers built up over decades.

Read on 3 more paragraphs

The register lists 42 versions with unladen weights from 270 to 984 kg, gross weights from 1,200 to 2,000 kg and widths from 1,600 to 2,330 mm; as length the register gives 4,250 mm.

Trailers of this weight class, between a light trailer and a light car trailer, serve everyday hauling of garden waste, building material, motorcycles or small machinery and are towed behind cars or light commercial vehicles; the span of gross weights covers both unbraked and braked versions.

When buying used, the frame for rust and distortion, axles and wheel bearings, the overrun brake system on braked versions, side panels and deck for wear, and the lighting, number plate holder and condition of the coupling head and jockey wheel are worth checking. Several of these codes also appear again with the AL suffix or in altered spelling, so the register lists closely related variants of the same short designations separately.

Sources: Kennwerte der Modelle Ablas (weitere Modelle)

Technical data

Dimensions and weights

Width2,160 mmcorrect
Unladen weight659 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the ABLAS ASS2 weigh?

The unladen weight is 659 kg.

What is the gross vehicle weight of the ABLAS ASS2?

2,000 kg.

Up to what speed is the ABLAS ASS2 approved?

Approved up to 100 km/h.

When was the ABLAS ASS2 built?

Production years: 1988.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare