Baveco P25 5
Built: 1995-1997 · Series: P25
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Baveco P25 – trailers of the P25 range with a gross weight rating of 6,000 to 8,400 kg: five versions from P25 1 to P25 5A, 7,700 to 10,300 mm length, class O3
The P25 range gathers five versions in the register, from P25 1 to P25 5A, and with gross weight ratings of 6,000 to 8,400 kg falls into vehicle class O3, trailers of 3.5 to 10 tonnes. The models therefore sit above the simple 3.5-tonne car trailers and need a towing vehicle rated accordingly, usually a light truck or an agricultural tractor with sufficient hitch capacity.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 1,440 to 2,147 kg and gross weight ratings from 6,000 to 8,400 kg. Lengths range from 7,700 to 10,300 mm, widths from 2,320 to 2,500 mm.
Trailers of this weight class serve in commercial transport to carry machinery, vehicles and bulk goods behind medium-weight towing vehicles; with lengths over 10 m and gross weights close to 8.4 tonnes, the larger P25 versions already border on light low-loader and platform trailers used in construction and earthworks. This span of length and weight lets an operator match the specific version to the size and weight of the machine or vehicle being carried.
On a used example, check the frame and chassis rails for cracks and corrosion, the condition of the axle units and suspension, the overrun brake with its linkage and pads, and the lighting and tyres. On the longer versions, also check the torsional stiffness of the deck and the condition of the load-lashing points; parts for axles and brake components come from the open trailer-parts trade.
Sources: Kennwerte der Modelle Baveco P25
Technical data
Dimensions and weights
| Length | 10,300 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 5,630 mmcorrect |
| Unladen weight | 1,720 kgcorrect |
| Gross vehicle weight | 7,200 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Baveco P25 5 weigh?
The unladen weight is 1,720 kg.
What is the gross vehicle weight of the Baveco P25 5?
7,200 kg.
Up to what speed is the Baveco P25 5 approved?
Approved up to 100 km/h.
What are the dimensions of the Baveco P25 5?
10,300 mm × 2,500 mm.
When was the Baveco P25 5 built?
Production years: 1995-1997.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.