Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersBaveck › OPL22000

Baveck OPL22000

Built: 2014-2014 · Series: Other models

More machines from model year 2014

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The OPL22000 comes from Baveck. Production: 2014. The machine is 2,550 mm wide. The unladen weight is 6,350 kg. Top speed is 100 km/h. The gross vehicle weight is 22,000 kg. Unladen weight across the Baveck range ranges from 610 to 6,390 kg; the OPL22000 sits at the top of that range with 6,350 kg. Its immediate neighbours are the OPL 150 below it with 5,540 kg and the MA18000 above it with 6,390 kg. 16 Baveck models are on record. The model is listed under Trailers. 6 verified figures from 1 source are on file.

Baveck – other models: special trailers outside the named ranges, from the HW cable-drum series (Haspelwagen) to the Railwagen, 590 to 6,390 kg unladen weight, 1.3 to 28 t gross vehicle weight

This page gathers the Baveck trailers the register could not assign to a named range. The HW series (HW 200 MX to HW 5500 MX) are Haspelwagen, trailers for transporting cable drums, alongside which the register lists further special trailers for haulage and construction tasks under the names Railwagen, MX, MX2, ZW and the OPL series.

Read on 3 more paragraphs

The register lists here 29 versions with unladen weights from 590 to 6,390 kg, gross vehicle weights from 1,300 to 28,000 kg and widths from 1,320 to 2,550 mm; length is recorded for ten models and ranges from 3,650 to 9,200 mm.

Haspelwagen serve for winding, unwinding and transporting large cable drums in cable-laying and civil engineering work; the brand's other series cover, with gross vehicle weights up to 28 tonnes, a broad spectrum of special haulage.

When buying a used Haspelwagen, what matters above all is the condition and function of the drum mount and the winding drive, and on the other series the condition of frame, axles and braking system as well as rust on load-bearing parts; parts for this class of special vehicle are sourced through Baveck and specialist commercial-vehicle dealers.

Sources: Kennwerte der Modelle Baveck (weitere Modelle)

Technical data

Dimensions and weights

Width2,550 mmcorrect
Unladen weight6,350 kgcorrect
Gross vehicle weight22,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Baveck OPL22000 weigh?

The unladen weight is 6,350 kg.

What is the gross vehicle weight of the Baveck OPL22000?

22,000 kg.

Up to what speed is the Baveck OPL22000 approved?

Approved up to 100 km/h.

When was the Baveck OPL22000 built?

Production years: 2014.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare