Baos BPAK 356514
Built: 2006-2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Baos – other models: the collective page of O2-class trailers outside the named ranges, up to 3.5 tonnes gross weight, 440 to 2,210 kg unladen weight, 1,310 to 2,550 mm wide
This page gathers the Baos trailers the register could not assign to a named range. With gross weights up to 3.5 tonnes, the models fall into the O2 class. The model designations combine one or two letters such as BP, BVA, BVAD, M and MV with a multi-digit number for the individual version; the letter D at the end of some designations such as BVAD marks a separate chassis or body variant within that line.
Read on 3 more paragraphs
The register lists here 24 versions with unladen weights from 440 to 2,210 kg, gross weights from 1,300 to 3,500 kg, widths from 1,310 to 2,550 mm and, for part of the models, lengths from 4,450 to 7,300 mm.
Spanning small single-axle trailers to tandem-axle trailers close to the 3.5-tonne limit, the Baos range covers the typical span of medium-duty utility trailers sought in trades and landscaping; the unladen-weight span of 440 to 2,210 kg within the same gross-weight class shows clear differences in construction and payload design between the smallest and largest models.
On a used example, corrosion on the frame and sides, the condition of axles and brakes, the function of the overrun brake, the coupling head and jockey wheel, and the floor sheets and loading ramps count; on the heavier tandem-axle models, also the equalising suspension and the condition of the brake drums. Spare parts run through the specialist trailer trade.
Technical data
Dimensions and weights
| Width | 2,200 mmcorrect |
|---|---|
| Wheelbase | 1,300 mmcorrect |
| Unladen weight | 1,480 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Baos BPAK 356514 weigh?
The unladen weight is 1,480 kg.
What is the gross vehicle weight of the Baos BPAK 356514?
3,500 kg.
Up to what speed is the Baos BPAK 356514 approved?
Approved up to 100 km/h.
When was the Baos BPAK 356514 built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.