Start › Electric motors › Baldor › EMM4100-58

Baldor EMM4100-58

Series: Other models

Source: https://www.abb.com/global/en/products/7bem4110t-bg

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Baldor lists the EMM4100-58 as a three-phase induction motor. The rated output is 11 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 180 M in foot-mounted form. The protection class is IP55. The efficiency is 92.8 per cent at full load, 93.5 per cent at 75 per cent load and 93.1 per cent at half load. The motor weighs 206 kg. The mounting arrangement to IEC 60034-7 is B3. The motor is built in the USA. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEEE 112-B(USA). Rated output across the Baldor range ranges from 0.75 to 1,119 kW; the EMM4100-58 sits at the bottom of that range with 11 kW. Its immediate neighbours are the ZDMM3774D below it with 7.5 kW and the 07K349Y251M1 above it with 11.2 kW. 841 Baldor models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Technical data

Engine

Rated output11 kWcorrect

Dimensions and weights

Weight206 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles6correct
Protection classIP55correct
Frame size180 M (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load92.8 %correct
Efficiency at 75 % load93.5 %correct
Efficiency at half load93.1 %correct

Origin and approval

Country of manufactureUnited States of Americacorrect
Standard appliedAS/NZS 1359.5:2004correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the Baldor EMM4100-58 have?

The Baldor EMM4100-58 delivers 11 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

05E535W710G1

06H874W461Z1

07C152X578G4

07D015W860G1

07H110R571G1

07H531W722G2

07H549W280G1

07K349Y251M1

07L304Y120G1

09-A000-0104

09C101Y147G1

09C102X412G5

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare