Start › Electric motors › Baldor › 39E366W915G1

Baldor 39E366W915G1

Series: Other models

Source: https://baldor.co.id/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Baldor 39E366W915G1 is a three-phase induction motor. The rated output is 11 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 256T. The protection class is IP12. The efficiency is 92.4 per cent at full load, 92.4 per cent at 75 per cent load and 91.4 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in the USA. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEEE 112-B(USA). Rated output across the Baldor range ranges from 0.75 to 1,119 kW; the 39E366W915G1 sits at the bottom of that range with 11 kW. Its immediate neighbours are the ZDMM3774D below it with 7.5 kW and the 07K349Y251M1 above it with 11.2 kW. 841 Baldor models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output11 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP12correct
Frame size256Tcorrect
Mounting (IEC 60034-7)B3correct
Efficiency at full load92.4 %correct
Efficiency at 75 % load92.4 %correct
Efficiency at half load91.4 %correct

Origin and approval

Country of manufactureUnited States of Americacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEEE 112-B(USA)correct

Frequently asked questions

How much power does the Baldor 39E366W915G1 have?

The Baldor 39E366W915G1 delivers 11 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

05E535W710G1

06H874W461Z1

07C152X578G4

07D015W860G1

07H110R571G1

07H531W722G2

07H549W280G1

07K349Y251M1

07L304Y120G1

09-A000-0104

09C101Y147G1

09C102X412G5

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare