Austro Daimler ADAZ
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Austro Daimler ADAZ is a tractor unit made by Austro Daimler.
Power is transmitted through a 3-Gang gearbox. Length is 5.73 m, with 2.34 m width and 2.25 m in height.
Technical data
Engine
| Engine | 6-Zylinder M612 11.946 cm³correct |
|---|
Dimensions and weights
| Length | 5,730correct |
|---|---|
| Width | 2,340correct |
| Height | 2.250 mm (ohne Plane)correct |
| Unladen weight | 5,500correct |
Drivetrain and chassis
| Gearbox | 3-Gangcorrect |
|---|
Frequently asked questions
How much does the Austro Daimler ADAZ weigh?
The unladen weight is 5,500 kg.
What are the dimensions of the Austro Daimler ADAZ?
5,730 mm × 2,340 mm × 2,250 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.