Austin Morris MINI 95L
Built: 1982-1982 · Series: Other models
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Austin/Morris – other models: the collective page of Mini Van and Pick-up commercial versions outside the named ranges, 998 to 1,275 cm³ displacement, 610 to 870 kg unladen weight
Austin and Morris were the two brand names under which the British Motor Corporation, and later British Leyland, sold the same Mini in parallel from 1959, badge-engineered with identical mechanicals differing only in marque; alongside the saloon came the Mini Van and Mini Pick-up, light commercial variants with an extended wheelbase for trade customers. This page gathers the Austin and Morris commercial types the register could not assign to a named range.
Read on 3 more paragraphs
The register lists here 6 versions with displacements from 998 to 1,275 cm³, all four-cylinder, unladen weights from 610 to 870 kg, gross weights from 930 to 1,365 kg and widths from 1,350 to 1,650 mm.
The Mini Van and Mini Pick-up were popular in Britain with tradesmen, the Post Office and small businesses, combining the Mini's agility and low running costs with a load area large for the class; they competed with similar commercial variants from Citroën and Renault. Production of the British Mini in commercial guise ran in parallel at the Longbridge and Cowley plants.
On these small commercial vehicles, underbody corrosion, the condition of the gearbox and clutch, and the mounting of the engine subframe all matter; parts for the A-Series engine and running gear are well supplied through the broad Mini parts scene, while body panels specific to the Van and Pick-up are rarer.
Sources: Kennwerte der Modelle Austin/Morris (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 998 cm³correct |
Dimensions and weights
| Width | 1,500 mmcorrect |
|---|---|
| Wheelbase | 2,130 mmcorrect |
| Unladen weight | 610 kgcorrect |
| Gross vehicle weight | 965 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Austin Morris MINI 95L weigh?
The unladen weight is 610 kg.
What is the gross vehicle weight of the Austin Morris MINI 95L?
965 kg.
What engine does the Austin Morris MINI 95L have?
4 cylinders, 998 cm³ displacement.
When was the Austin Morris MINI 95L built?
Production years: 1982.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.