Start › Electric motors › Atlas Copco › 1092002495

Atlas Copco 1092002495

Series: Other models

Source: https://www.atlascopco.com/en-us/itba/products/air-motors/lz

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 1092002495 from Atlas Copco is a three-phase induction motor. The rated output is 30 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 180 M in foot-mounted form. The protection class is IP55. The efficiency is 93.8 per cent at full load, 93.9 per cent at 75 per cent load and 93 per cent at half load. The motor weighs 216 kg. At full load it delivers 96.8 Nm. The mounting arrangement to IEC 60034-7 is B5. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Atlas Copco range ranges from 2.2 to 132 kW; the 1092002495 sits in the lower part of that range with 30 kW. Its immediate neighbours are the F2-180M1-2 below it with 26 kW and the 1092090118 above it with 37 kW. 116 Atlas Copco models across 2 series are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Technical data

Engine

Rated output30 kWcorrect

Dimensions and weights

Weight216 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size180 M (foot)correct
Mounting (IEC 60034-7)B5correct
Efficiency at full load93.81 %correct
Efficiency at 75 % load93.86 %correct
Efficiency at half load93.04 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Atlas Copco 1092002495 have?

The Atlas Copco 1092002495 delivers 30 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1092002480

1092002483

1092002486

1092002489

1092002492

1092090001

1092090118

1092090180

1092090202

1092090219

1092090301

1092090381(YXLA250M1-2)

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare