Atc SP ZOO
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
ATC – trailers (further models): heavy semi-trailers for heavy haulage, gross weight from 44 to 50 tonnes, up to 16.9 metres long
ATC is listed as a manufacturer of heavy semi-trailers. This page collects the versions outside named ranges, including ANN, APK, APP, APW and CPL5050.
Read on 4 more paragraphs
The register lists 8 versions with kerb weights from 6,700 to 12,100 kg, gross weights from 44,000 to 50,000 kg, lengths from 12,945 to 16,915 mm and widths from 2,500 to 2,550 mm. The figures consistently match multi-axle semi-trailers at the top of the heavy-haulage segment.
With gross weights from 44,000 to 50,000 kg, the range sits well above the usual 40-tonne limit for normal road haulage and falls into EU trailer category O4 with mandatory air brakes. Journeys with a gross weight above 40 tonnes require an exceptional or individual heavy-haulage permit in most European countries, often combined with a route check, escort vehicle or speed restriction. The tow vehicle required is a tractor unit with licence category CE, and at this weight class the load distribution across the semi-trailer's several, often steerable axles becomes critical as well.
Semi-trailers of this size carry bulk goods, building materials or mass cargo over 40 tonnes gross weight and are mainly used by hauliers in heavy haulage. The tight clustering between 44 and 50 tonnes shows a specialisation at the upper end of the permitted semi-trailer class.
When buying used in this weight class, check the condition of the chassis and axle units, the brakes, tyres and suspension, and the registration documents, since weights above 44 tonnes usually require special permits. Parts for axles, brakes and suspension are available through the general commercial-vehicle trade.
Sources: SpecCodex register, model data: ATC (weitere Modelle)
Technical data
Dimensions and weights
| Length | 15,380 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 8,500 kgcorrect |
| Gross vehicle weight | 44,000 kgcorrect |
Frequently asked questions
How much does the Atc SP ZOO weigh?
The unladen weight is 8,500 kg.
What is the gross vehicle weight of the Atc SP ZOO?
44,000 kg.
What are the dimensions of the Atc SP ZOO?
15,380 mm × 2,550 mm.
When was the Atc SP ZOO built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.