Araus 300
Built: 1965-1965 · Series: Other models
The Araus 300 is a machine built by Araus. Production: 1965. The engine delivers 40 hp (30 kW). The engine comes from Hanomag. The model was built in Cordoba, Argentina. The fuel is diesel. The engine fitted is the D28. Rated output within this group ranges from 18.5 to 625 hp; the 300 sits at the bottom of that range with 40 hp. Its immediate neighbours are the Gleaner E below it with 36 hp and the 30 above it with 54 hp. 8 Araus models are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.
Technical data
Engine
| Engine make | Hanomagcorrect |
|---|---|
| Engine model | D28correct |
| Fuel | dieselcorrect |
| Power | 40 hp (30 kW)correct |
Drivetrain and chassis
| Clutch | drycorrect |
|---|
Origin and approval
| Plant | Cordoba, Argentinacorrect |
|---|
Frequently asked questions
How much power does the Araus 300 have?
The Araus 300 delivers 40 hp.
When was the Araus 300 built?
Production years: 1965.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.