Allmand 8435
Built: 2004-2004 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Allmand 8435 is a tractor built in 2004. The three-cylinder engine produces 27 kW.
Power is transmitted through a synchro-shuttle shift gearbox, drive type: MFWD.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 19.8 to 28 kW; with 27 kW, the 8435 sits in the mid-field. Directly alongside are the 8330 with 19.8 kW below and the 8450 with 28 kW above.
Technical data
Engine
| Engine make | Mitsubishicorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 36 hp (27 kW)correct |
| Cylinders | 3correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Gearbox | synchro-shuttle shiftcorrect |
Origin and approval
| Plant | South Koreacorrect |
|---|
Frequently asked questions
How much power does the Allmand 8435 have?
The Allmand 8435 delivers 36 hp.
What engine does the Allmand 8435 have?
3 cylinders, Diesel.
When was the Allmand 8435 built?
Production years: 2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.