Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Agrostroj › TZ-4K-14

Agrostroj TZ-4K-14

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Agrostroj TZ-4K-14 is a machine built by Agrostroj. The machine is 2,750 mm long, 950 mm wide and 1,300 mm high. The unladen weight is 870 kg. Unladen weight within this group ranges from 7 to 79,500 kg; the TZ-4K-14 sits at the bottom of that range with 870 kg. Its immediate neighbours are the Workcross 1000-3 below it with 865 kg and the W 90 above it with 880 kg.

Technical data

Engine

EngineDiesel, vornecorrect

Dimensions and weights

Length2,750 mmcorrect
Width950 mmcorrect
Height1,300 mmcorrect
Unladen weight870 kgcorrect

Frequently asked questions

How much does the Agrostroj TZ-4K-14 weigh?

The unladen weight is 870 kg.

What are the dimensions of the Agrostroj TZ-4K-14?

2,750 mm × 950 mm × 1,300 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare