Agrip JD 5000 skidder
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Agrip JD 5000 skidder is a tractor made by Agrip. Engine output is 89 kW.
It runs with MFWD.
The engine is water-cooled. Within the range, rated power spans from 11 to 89 kW; with 89 kW, the JD 5000 skidder sits at the top. Below it ranks the ARD40 with 30 kW.
Agrip – other models: the collective page of tractors and skidder outside the named ranges, ARD 15, ARD 20, ARD 40 and the JD 5000 skidder, 11 to 89 kW, Aster, Berliot and CLM engines
This page gathers the Agrip machines the register could not assign to a named range: the smaller ARD range with the ARD 15, ARD 20 and ARD 40 types, whose type number rises with the power class, and the JD 5000 skidder for timber extraction in forestry. The engines of the ARD models come from the outside makers Aster, Berliot and CLM, which is typical of smaller tractor makers that rely on bought-in drive units rather than their own designs.
Read on 3 more paragraphs
The register lists here 4 versions with 11 to 89 kW, or 15 to 120 hp.
The ARD tractors cover the lower and mid power class for smaller agricultural and municipal work such as tillage, mowing and transport, while the JD 5000 skidder, with markedly higher power, is designed for timber harvesting and hauling logs over rough ground – two different fields of use on the same collective page, showing the broad scope of smaller farm-machinery line-ups.
On used ARD tractors, engine condition and compression, the condition of clutch and gearbox, and rust on sheet metal count; on the skidder, additionally the condition of the cable winch, the articulation joint and the tyres, as these parts are under the greatest strain in forestry use, as well as the tightness of the hydraulic cylinders for the blade and log cage.
Sources: SpecCodex register, model data: Agrip (weitere Modelle)
Technical data
Engine
| Engine make | Berliotcorrect |
|---|---|
| Power | 120 hp (89 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Lignieres, Cher, Francecorrect |
|---|
Frequently asked questions
How much power does the Agrip JD 5000 skidder have?
The Agrip JD 5000 skidder delivers 120 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.