StartTractorsAGCO › RT100

AGCO RT100 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO RT100 is a tractor made by AGCO. 75 kW is what the six-cylinder engine gets out of 6.6 litres. Rated power is reached at 2,200 rpm.

It reaches up to 52 km/h. Unladen weight is 5,935 kg.

The fuel specified is diesel. It was replaced by the AGCO RT100A. Within the range, rated power spans from 16.8 to 216 kW; with 75 kW, the RT100 sits in the mid-field. Directly alongside are the LT90A with 67 kW below and the RT110A with 82 kW above.

Technical data

Engine

Engine makeCumminscorrect
Engine model6.6Lcorrect
Fueldieselcorrect
Power100 hp (75 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,600.7 cm³correct
Naturally aspiratednaturally aspiratedcorrect

Dimensions and weights

Unladen weight5,935 kgcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect
Gearbox typecontinuously variablecorrect
Forward gears2correct
Top speed51.5 km/hcorrect
System voltage24 Vcorrect

Working data

Pump flow109.8 l/mincorrect
Hydraulic pressure199.9correct
Fuel tank capacity70 lcorrect

Origin and approval

PlantBeauvois, Francecorrect
SuccessorAGCO RT100Acorrect

Where this model stands

Power-to-weight ratio: 12.6 kW/t (75 kW / 5.9 t)

Power class: Large (100–180 hp)

Stronger than 69% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO RT100 have?

The AGCO RT100 delivers 100 hp.

How much does the AGCO RT100 weigh?

The unladen weight is 5,935 kg.

What engine does the AGCO RT100 have?

6 cylinders, 6,601 cm³ displacement, diesel.

How fast does the AGCO RT100 go?

Top speed is 51.5 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare