AGCO GT75A 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The AGCO GT75A is a tractor from the AGCO 4WD Tractor series. The engine draws 84 hp (61.9 kW) from 4 litres. Rated output is reached at 2,200 rpm, so it works in the lower rev range.
Unladen weight is 2,960 kg.
Within the range, rated power spans from 22.8 to 294 hp; with 84.2 hp, the GT75A sits in the upper third. Directly alongside are the GT65A with 72 hp below and the DT180a with 218 hp above.
Technical data
Engine
| Power | 84.2 hp (61.9 kW)correct |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Displacement | 4,000.1 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Unladen weight | 2,960 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | synchro-shuttlecorrect |
|---|---|
| Forward gears | 20correct |
| Reverse gears | 10correct |
Working data
| Pump flow | 86.3 l/mincorrect |
|---|---|
| Fuel tank capacity | 89.7 lcorrect |
Other data
| Height | 2,694.4correct |
|---|
Where this model stands
Power-to-weight ratio: 20.9 kW/t (62 kW / 3 t)
Power class: Universal (40–100 hp)
Stronger than 59% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the AGCO GT75A have?
The AGCO GT75A delivers 84.2 hp.
How much does the AGCO GT75A weigh?
The unladen weight is 2,960 kg.
What engine does the AGCO GT75A have?
4,000 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.