Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Able › Y2HE132S1-2

Able Y2HE132S1-2

Series: Other models

The photo shows the Y2HE100L2-2 from the same series. Source: https://www.abb.com/global/en/products/7bem2334t-12

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Able Y2HE132S1-2 is a three-phase induction motor. The rated output is 5.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP44. The efficiency is 87.6 per cent at full load, 87.3 per cent at 75 per cent load and 82.8 per cent at half load. At full load it delivers 18.11 Nm. The mounting arrangement to IEC 60034-7 is B34. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to AS/NZS 1359.102.3:2000. Rated output across the Able range ranges from 1.5 to 5.5 kW; the Y2HE132S1-2 sits at the top of that range with 5.5 kW. Its immediate neighbours are the Y2HE100L2-2 below it with 4 kW. 4 Able models are on record.

Able – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, frame sizes 90 to 132, 1.5 to 5.5 kW, two-pole, IP44

This page gathers the three-phase motors from Able that the Australian energy-efficiency register (GEMS/MEPS) does not assign to a named range. The four versions carry the designations Y2HE90S-2, Y2HE100L-2, Y2HE100L2-2 and Y2HE132S1-2 and are registered as electric motors under the MEPS scheme. China is recorded throughout as the country of manufacture.

Read on 3 more paragraphs

The register lists here four versions with 1.5 to 5.5 kW rated output, all two-pole and rated for a 415 V supply. Full-load efficiency ranges from 84.67 to 87.6%, and at 75% load from 84 to 87.93%. IEC frame sizes range from 90 to 132, the protection class is IP44 throughout, and the mounting code is B34 throughout. Testing followed AS/NZS 1359.5:2004 with test method A, in the GEMS "Single product class" category; none of the four versions reaches the higher GEMS efficiency tier.

With IP44 protection, the page represents the smaller segment of standard motors for indoor use without particular moisture or dust exposure, such as pumps, fans or smaller drives. The power band up to 5.5 kW covers the lower end of classic three-phase standard motors.

On a used purchase or replacement, bearing condition, a tested winding insulation resistance, visible overheating traces at the terminal box and fan cover, and a legible nameplate with frame size, pole count and protection class all count. Anyone wanting variable-speed operation should check inverter compatibility beforehand. Spare parts for motors of these frame sizes are generally available through general electric-motor suppliers.

Sources: Kennwerte der Modelle Able (weitere Elektromotoren, MEPS-Registrierung)

Technical data

Engine

Rated output5.5 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP44correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B34correct
Efficiency at full load87.6 %correct
Efficiency at 75 % load87.3 %correct
Efficiency at half load82.8 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the Able Y2HE132S1-2 have?

The Able Y2HE132S1-2 delivers 5.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare