StartElectric motorsABB › M3JP315MLA2

ABB M3JP315MLA2

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ABB M3JP315MLA2 is a three-phase induction motor built by ABB. The rated output is 184.99 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 315. The protection class is IP55, IP56 and IP65. The efficiency is 95.9 per cent at full load, 95.8 per cent at 75 per cent load and 95.1 per cent at half load. The motor weighs 1,190 kg. At full load it delivers 592 Nm. Mounting arrangements to IEC 60034-7: B3, B5, B8, B35, V1, V3, V5 and V6. Stated countries of manufacture: Finland, China and Poland. The figures come from the Australian MEPS register under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the ABB range ranges from 0.75 to 185 kW; the M3JP315MLA2 sits at the top of that range with 184.99 kW. Its immediate neighbours are the M3KP315MLA4 below it with 184.9 kW and the M3GP315SMB8 above it with 185 kW. 2143 ABB models across 2 series are on record. The model is listed under Electric motors. 27 verified figures from 1 source are on file.

Technical data

Engine

Engine familyM3correct
Engine familiesM3correct
Rated output184.99 kWcorrect

Dimensions and weights

Weight1,190 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55, IP56, IP65correct
Frame size315correct
Mounting (IEC 60034-7)B3, B5, B8, B35, V1, V3, V5, V6correct
Efficiency at full load95.9 %correct
Efficiency at 75 % load95.8 %correct
Efficiency at half load95.1 %correct

Origin and approval

Country of manufactureFinland, China, Polandcorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the ABB M3JP315MLA2 have?

The ABB M3JP315MLA2 delivers 185 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare