Start › Electric motors › ABB › M3AA 180MLA 6G

ABB M3AA 180MLA 6G

Series: M3AA

Source: https://ru.made-in-china.com/co_shiny-control/product_M2bax1

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ABB M3AA 180MLA 6G is a three-phase induction motor built by ABB. The rated output is 15 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The housing is frame size 180. The protection class is IP55, IP56, IP65 and IP66. The efficiency is 90.8 per cent at full load, 91.3 per cent at 75 per cent load and 90.9 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B8, B35, V1, V3, V5 and V6. Stated countries of manufacture: India, Poland, China and Finland. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the ABB range ranges from 0.75 to 185 kW; the M3AA 180MLA 6G sits at the bottom of that range with 15 kW. Its immediate neighbours are the M3KP180MLB8 below it with 11 kW and the M2AA225 above it with 18.5 kW. 2143 ABB models across 2 series are on record. The model is listed under Electric motors. 21 verified figures from 1 source are on file.

Technical data

Engine

Rated output15 kWcorrect

Electrical data

Number of poles6correct
Protection classIP55, IP56, IP65, IP66correct
Frame size180correct
Mounting (IEC 60034-7)B3, B5, B8, B35, V1, V3, V5, V6correct
Efficiency at full load90.81 %correct
Efficiency at 75 % load91.32 %correct
Efficiency at half load90.89 %correct

Origin and approval

Country of manufactureIndia, Poland, China, Finlandcorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the ABB M3AA 180MLA 6G have?

The ABB M3AA 180MLA 6G delivers 15 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

M3AA

M3AA 080 E 4E

M3AA 100 LB 2E

M3AA 100 LD 8E

M3AA 100LB 2

M3AA 100LB 8

M3AA 100LB 8E

M3AA 100LB8

M3AA 100LC 2K

M3AA 100LC 4

M3AA 100LC 4E

M3AA 100LC 6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare